drone professionale per ispezioni discreto e facile da trasportare
A high-precision drone optimised for mapping and surveying.
Equipped with the most effective safety systems available, it carries a payload optimised to generate 3D models measurable with the utmost accuracy, with GPS RTK employed for topographic points precise to the nearest centimetre.
Four high efficiency brushless motors and carbon propellers
Fast folding arms, carbon fiber frame for easy transport
Redundant auto pilot provided with internal inertial platform, GPS, barometer, data link equipped with:
RTH (return to home) with auto landing, auto take-off and position hold functions.
GPS Waypoints configuration for autonomous flight missions.
Flight planning software to perform “grid and survey” missions for georeferenced aerial photogrammetry.
Telemetric Data link for flight information and remote control.
Flight mission recording stored on memory card.
drone professionale per ispezioni discreto e facile da trasportareDATASHEET
- Payload: 1 Kg
- Max. takeoff weight (MTOW): 5,5 Kg
- Dimensions: 57x57x33h cm
- Class: 69
- Gimbal dimensions: 134x166x147 mm
- Operating temperature: -5° + 40°
- Operating humidity: 0% – 100%
- Wind resistance: 13 m/s
- Continuative flight autonomy: 18’-30’
- Data Link: 2,4 digital GHz with frequency hooping
- Max. height: 150 metres (electronically limited)
- Max. range: 1,5 Km (LOS)
- Max. speed: 10 m/s
- Vertical speed: 5 m/s (electronically limited)
payload mapper per drone professionale
A payload optimised for mapping, carried on a multi-rotor UAV.
The ultra-light cradle guarantees top-flight performance and endurance, offsetting the yaw that typically affects the drone as it proceeds along a waypoint flight plan while providing remote-controlled functions of tilt, imaging and video preview.
Set on a cushioned ball-bearing mount and moved by a direct-drive mechanism, it eliminates the well-known problem of micro-motion caused by the UAV.
It supports a variety of visible sensors, including the SONY RX100 (20.1 Megapixel).
payload survey per drone professionale
Payload Survey RTK
A payload optimised for mapping and surveying of topographic points in flight.
A stabilised 2-axis brushless payload, it is made to obtain highly accurate 3D models, thanks to a GPS RTK module that acquires topographical points precise to the nearest centimetre.
The 20.1 megapixel camera, combined with a metadata recorder that registers all the gps positioning and flight-attitude information, make possible the construction of accurate models with an elevated level of precision.
payload ISR per drone professionale
A payload designed for security and intelligence operations.
A stabilised, 3-axis brushless payload with remote-control functions, a full-HD camera with 30x optical zoom, click and point target tracking and medium and long-range HD streaming to the GCS. Thanks to its special photo/video sensor, it can acquire still pictures at 20 megapixel, revealing details not visible to the naked eye.
payload energy per drone professionale
Payload Energy Report
A payload optimised for inspections and status reports on large-scale photovoltaic systems.
A stabilised 2-axis brushless payload, for thermal and visible surveying, it is optimised to detect, identify, catalogue and geo-tag anomalies and instances of deterioration in large-scale photovoltaic systems, providing precise, accurate output (a pdf status report) on the condition of the energy plant.
The operating software makes possible real-time detection and cataloguing of information on the position and the state of the damaged panel, generating, at the conclusion of the surveying activities, an exhaustive status report, complete with geo-referencing, thermal imaging and data on current conditions.
sistemi di controllo per il tuo drone professionale
- Radio control transmitter with manual and assisted mode.
- Rugged ground station to set up the autonomous flight, image preview and information on a 7’’ Android tablet.
- Ip 67 briefcase.
- Lithium battery powered ground controller with flight information.
- GCS Control: Parameter control software, built on Android tablet to set waypoints and flight settings.
Italdron controller per il tuo drone professionale
All you need ... in the palm of your hand.
Italdron Controller is an operating system that makes it possible to manage the entire Italdron fleet using a single device.
This instrument is outfitted with a simple, effective interface designed by professionals and for professionals, and it is 100% “Made in Italdron”.
guida tecnica per utilizzare il tuo drone professionale
Drone LiDAR vs Photogrammetry: A Technical Guide
In a recent article at our sister site UAV Expo News, editor Jeremiah Karpowicz laid out some basic facts about these two capture technologies. The piece is a fantastic first stop for consumers of data who want to dig through the hype and hyperbole to determine the right kind of sensor for their needs.
That piece included a lot of advice from experts in the field, including Lewis Graham, president and CTO of the GeoCue Corporation and general pillar of the survey scene. Graham offered so much useful technical detail that wouldn’t fit into the piece that we decided to give his advice a separate spotlight.
paracaduti e sistemi di sicurezza per il tuo drone professionale
Don't let the risk be your accomplice!
A cornerstone of the Italdron philosophy from the start, as well as one of the company’s strong points, is its concern for safety.
Safety is a concept that has to do with the full spectrum, all 360°, of each and every phase of activities in this sector.
Italdron is the first European company to have installed on its products some of the most effective safety devices available, such as the automatic parachute and redundancy for the autopilot and the sensors.